- High-speed USB 2.0 device with up to 500kHz sampling rate
- All functions fully software configurable
- 12-bit with 16 single-ended or 8 differential inputs
- Eight input ranges, unipolar or bipolar
- Autocalibration and real-time hardware calibration and oversampling for accurate data
- Unique channel-by-channel programmable gain feature
- Data buffer for A/D
- Synchronous, asynchronous, and timed trigger modes
- 16 high-current digital I/O lines
- 16-bit counter/timer for event counting or frequency generation
- USB/104 form-factor for OEM embedded applications
- Small, (4” x 4” x 1.25”) rugged industrial enclosure
- OEM (board only) option features PC/104 module size and mounting compatibility
- All required power drawn from USB port, no external power adapter required
- Overvoltage protection
- Alternate embedded USB connector
FACTORY OPTIONS
- External power for high current capabilities
- Extended temperature and DIN rail mounting provisions
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- 4-20mA or 10-50mA inputs
FUNCTIONAL DESCRIPTION
The USB-AI12-16A Series offer an ideal solution for adding portable, easy-to-install high-speed analog and digital I/O capabilities to any computer with a USB port. These units are USB 2.0 high-speed devices, offering the highest speed available with the USB bus. The USB-AI12-16A is a 12-bit resolution A/D board capable of speeds up to 500kHz for its 16 single-ended or 8 differential analog input channels. Model USB-AI12-16 reaches speeds of 250kHz, and the USB-AI12-16E is our economy version at 100kHz. Standard features also include 16 digital I/O lines and a 16-bit counter/timer—all packaged in a small, rugged, industrial enclosure.
These small, compact, multifunction I/O boards provide the user with everything needed to start acquiring, measuring, analyzing, and monitoring a variety of applications. These data acquisition boards can be used in many current real-world applications such as precision measurement, analysis, monitoring, and control in countless embedded applications.
These units are designed to be used in rugged industrial environments but are small enough to fit nicely onto any desk or testing station. The board itself is PC/104 sized (3.550 by 3.775 inches) and ships inside a steel powder-coated enclosure with an anti-skid bottom and a DIN-rail mounting capability.
The units feature eight standard analog voltage input ranges (independently configured), two factory current input ranges (4-20mA or 10-50mA) and include a data sample buffer. Model USB-AI12-16A features hardware real-time calibration capability which allows the card to continually compensate for offset/gain errors, giving a more accurate reading. To minimize noise, the board implements a technique called oversampling. Additionally, each channel contains its own analog ground pin which is helpful in reducing noise from external signal sources. A unique channel-by-channel programmable gain feature enables measurement of an assortment of large and small signals in one scan—all under software control at up to 500kHz. The boards data buffer and ability to trigger the A/D in real time assures synchronized sampling that is unaffected by other computer operations—an essential requirement for signal, vibration and transient analysis where high data rates must be sustained for short periods of time.
Analog to digital conversion starts or “A/D starts” are issued one of three ways: Software Start, Timer Start, or External Trigger Start. A/D starts are software configured to be either rising or falling edge. Additionally, A/D starts are software configured to be Single Channel or Scan. Single Channel samples data once from the next consecutive channel within the enabled set. A Scan samples data from all channels within the set at the fastest possible rate.
A fully programmable 8254 16-bit counter is provided with a maximum input frequency of 10MHz. The clock, gate (inputs) and output can be accessed externally for extended functionality. The counter can be configured in a variety of modes and has the ability to use external signals for its inputs.
OEM USB/104 FORM FACTOR
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that its PCB size and pre-drilled mounting holes match the PC/104 form factor (without the bus connections). This ensures easy installation using standard standoffs inside most enclosures or systems. The board can be added to any PCI-104 or PC/104 stack by connecting it to a USB 2.0 port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially important since many newer CPU chipsets do not support ISA and have plenty of USB ports. The USB-AI12-16 OEM boards can also be installed using standoffs inside other enclosures or systems. For embedded applications, an additional miniature USB input header is provided in parallel with the type B connector.
Applications
- Equipment monitoring
- Environmental measurements
- Embedded OEM
- Education/Laboratory
- Portable
- Industrial Automation
- Precision Measurement
- Analysis, Monitoring, and Control
ACCESSORIES
Available accessories include a wide variety of cables and screw terminal boards for quick and easy connectivity.
SOFTWARE
The USB-AI12-16A Series feature hotplug functionality allowing for quick connect/disconnect whenever you need additional I/O on your USB port. The module utilizes a high-speed custom function driver optimized for a maximum data throughput of 1MBps that is 50-100 times faster than the USB human interface device (HID) driver used by many competing products. This approach maximizes the full functionality of the hardware along with capitalizing the advantage of high-speed USB 2.0. The boards are supported for use in most operating systems and include a free Windows 98se/Me/2000/XP/2003 compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, C++ Builder, and Visual C++ for Windows. Also incorporated is a graphical setup program in Windows. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support include Windows XPe.
